Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Parts

WeThePeople Seatpost Clamp Bolt & Nut (Clash, Envy, Dawn, Cream, Sterling, and Utopia Frames)
$5.99
Don't fret if you've lost or stripped the original bolt to your WeThePeople Clash, Envy, Dawn, Cream, Sterling, or Utopia frame. This replacement seatpost clamp bolt and nut will get back out there in no time.
WeThePeople Toxic Pegs
$25.99 - $29.99
Grind the night and day away on WeThePeople's Toxic Pegs. The Toxic pegs are sold in pairs, so choose whether you want a set of 3/8-inch pegs or a mixed pair with one 3/8-inch and one 14mm peg. Material: 4140 heat-treated chromoly Length: 4" (101.6mm) Size: 2 x 3/8" or 3/8'' / 14mm combo Outer diameter: 1.33“ (34mm) Features: • Double-butted dent prevention design • Anti-spin bolts • Smaller diameter - less dents and more peg clearance
Odyssey Graduate PC Peg
$24.99
The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - Sold individually - 14mm with 3/8” adapters only - Replacement sleeves sold separately - 4.5" (length) x 1.5" (outer diameter) - 4.5 oz (9 oz for a pair)
Odyssey Gyro G3
$19.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
Odyssey Gyro G3 Lower Cables
$7.99 - $8.16
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
Odyssey Gyro G3 Upper Cables
$7.99 - $9.99
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
Odyssey MPEGs Steel Pegs
$19.99
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
Odyssey Thunderbolt Spindle Bolt
$12.99
- Direct replacement for Thunderbolt cranks.   - 6mm.
Odyssey Bluebird Chain
$26.99
For the Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
Odyssey Evo 2 Brakes
$49.99
The Evolver Brake was introduced in 2000. It was called the Evolver because it was destined to change the way all U Brakes were designed. If you look at brakes before the Evolver and after, you can see that the name is applied perfectly. The Evo 2 is the natural progression of the original Evolver. It has seen constant refinement and new running changes to keep it as the standard in BMX braking. This design allows for a seemingly limitless amount of cable installation options, while remaining equally powerful as both a front OR rear wheel brake. New forge tooling was created that provides for a sleeker side profile. Arms are forged prior to machining for strength and durability. Contrary to the uneducated in metallurgy, a forged metal piece is of much higher strength than a piece machined from a block of material. - All of the cable set screws are now flat-tipped to prevent excess damage to the cable’s inner wire. Cable lugs are smaller and use a 10mm hex head. - Pre-lugged straddle cable is shorter. - Front cable adapter is smaller and made of aluminum. - Flush surfaces, with the lowest possible overall stack height. - Front or rear wheel use. - Redesigned brake pads. - Two sets of springs (hard and soft for custom tension/modulation). - Spring tension indicators (easy set up). - Newly designed straddle hanger.
Odyssey Ghost Brake Pads
$9.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Odyssey Key Chain
$33.99 - $43.99
Traditional chain pins are 3mm in diameter. The Key Chains are 5mm, and they are available with a hollow or solid pin assembly. These oversized pins are 4 times stronger than traditional pins, and the chances of bending one, whether the pin is hollow or solid, are essentially zero. The 5mm riveted pins provide added strength, but they also provide a bigger contact surface with the chain’s plates, which makes them harder to push out or bend. The hollow pin assembly, by design, allows for a stronger rivet connection to form during manufacturing, resulting in a stronger chain overall. Each plate has a low profile and an extra narrow waist that makes it harder to catch the plates at unwanted times. At 1.4mm, the plates are substantially thicker than the plates of any other chain, and they’re also more than 50% harder to bend than the thickest existing 1.2mm chain plates too. Users can break and re-join the chain with just a 3mm hex key. The chain’s half link plates are taller at the bends to both increase stiffness and minimize stretch. Since the use of a chain breaker to re-join the chain has been eliminated, the pins can retain their original level of tightness from the factory. Also, carrying a spare master link and 3mm allen key in most cases is enough to repair the Key Chain when riding, so lugging around a chain tool is usually unnecessary. By using material as efficiently as possible, Odyssey has strengthened every component of the chain and kept the weight in the same range as their Bluebird chain. Stretching of the chain is minimized by using a standard alternating plate pattern and limiting the chain to a single, beefed up half link. This configuration maximizes the lifespan of the sprocket and driver. - Width: 1/8-inch
Odyssey Pro Headset
$24.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8 integrated headset. - 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
Odyssey R/F Series Pre-Load Bolt
$19.99
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.
Odyssey Springfield Brake Kit
$29.99
The Springfield Brake Kit will provide easy braking upgrades along with value, as the kit will be more affordable than buying each part individually. All necessary hardware will be included as well. Doesn't get much better! - One spring design - Comes with GHOST PADS - Hinged lever clamp - Medium sized lever
Odyssey Springfield Brakes
$19.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.
Odyssey Springfield Lever
$12.99 - $19.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.
SRAM Red eTap Group with Hydraulic Disc Brakes
$2,314.00 - $2,335.00
Without wires or cables, SRAM designed a simpler way to shift with the nearly flawless RED eTap, and now, the intuitive simplicity of the eTap system is available with the added performance of hydraulic road disc brakes (HRD). The SRAM RED eTap HRD shift-brake control offers the world’s first wireless drivetrain with SRAM's most advanced HRD platform yet, HydroHC. Simpler shifting, better braking—all in the name of true advancement. - Easy to install on any frame; compatible with all SRAM road 22 speed cranks, cassettes and chains. - Includes two 160mm Centerline two-piece six-bolt rotors In the Box: - Red eTap Front Derailleur w/ Battery - Red eTap Rear Derailleur w/ Battery - Red eTap HRD Right Shifter with Caliper - Red eTap HRD Left Shifter with Caliper - eTap Battery Charger and Power Cord - USB Stick and QuickStart Guide
Odyssey Cable Knarps
$3.99
- Sold in pairs. - Allen wrench included.
Odyssey Hawk Tripod Seat
$31.99
Chase is a fan of slim seats, so that is exactly what Odyssey worked with him on. The seat features a microfiber material with debossed branding along with gold inlays reminiscent of old BMX seats.
Odyssey Retro Seat
$29.99
In addition to the anniversary sprocket, Odyssey also offers these retro seats that will coincide/match with their collaboration with Vans.
Odyssey Tom Dugan Tripod Seat
$27.99
Here’s Odyssey's Tom Dugan signature Tripod seat. Odyssey worked with Tom to produce a simple slim seat design to his exact specifications. The debossed pattern on this seat even references the actual seat on his Honda motorcycle, which is a nice touch.
Odyssey Twisted PC Pedals
$13.99 - $17.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Crank Brothers Pedal Rebuild Kit
$15.99 - $19.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
Wheels Manufacturing Inc. Derailleur Hanger 146
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.
Wheels Manufacturing Inc. Derailleur Hanger 305
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket Head Screw Included - For 12x1.5 MAXLE - Replaces Pivot Part #018 (FP-RDH-TA-12MM-BLK-V3)
Wheels Manufacturing Inc. Derailleur Hanger 311
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. -CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (2) M3x10 Socket Head Screws - Fasteners not Included - Replaces Felt Part #9000466
Wheels Manufacturing Inc. Derailleur Hanger 312
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (1) M4x12 Socket Head Screw - Fasteners not Included - Replaces Felt Part #9000028
Wheels Manufacturing Inc. Derailleur Hanger 313
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Fasteners not Included - For Yeti with 148 Thru Axle Frames only - Replaces Yeti Part # 300060073
Wheels Manufacturing Inc. Derailleur Hanger 314
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For 148 Thru Axle Frames - Replaces Santa Cruz Part #04-17052
Page 1 of 41 Next page