Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$9.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$12.00 $15.00 20% Off
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$18.99 - $25.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$19.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$63.99
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.
- Brake or gear inner wire with PTFE coating for reduced friction - Length: 1800mm - Diameter: 1.6mm
The Box One Cassette Spacer Kit is extruded and CNC-machined from 6061-T6 aluminum and features a super lightweight minimalist design. Packaged in 4-piece kits which provide 1 to 10 millimeters of spacing adjustment to dial in that chain line. FEATURES - Adjustable from 1mm to 10mm for Adjusting Chainline - Extremely Lightweight XO Skeleton Design SPECIFICATIONS - Material: 6061-T6 Aluminum - Extruded & CNC Machined - Anodized Finish - Spacing: 1-10mm (1mm [2], 3mm [1], 5mm [1]) - Driver: HG Freehub Body
$19.00
Cold-forged and CNC machined from 6061-T6 aluminum alloy, Box One Fixed Seat Clamps are tough, lightweight, and exceptionally good looking. Featuring titanium hardware and laser-etched graphics, Box One Fixed Seat Clamps are available in anodized black, blue, red, and silver.
$29.00
Box One Single-Speed Aluminum Cogs are 7075-T6 aluminum alloy. It's designed to fit Shimano compatible cassette hubs and has a 5mm wide inner base, giving a more solid interface with the cassette body. The alloy cogs are anodized black with laser-etched graphics. FEATURES - Shimano Compatible Driver - 7075-T6 Alloy - 3/32" or 1/8" Chain Compatible - Lightweight SPECIFICATIONS - Material: 7075-T6 Aluminum - Process: Laser-etched logos Weight - 13t: 8 grams / 0.3 ounces - 14t: 11 grams / 0.4 ounces - 15t: 13 grams / 0.5 ounces - 16t: 14 grams / 0.8 ounces - 17t: 16 grams / 0.6 ounces - 18t: 18 grams / 0.65 ounces
$29.99
Box One Single-Speed Chromoly Cogs are CNC-machined from long-wearing CNC-machined chrome-molybdenum. It's designed to fit Shimano™ compatible cassette hubs and has a 5mm wide inner base, giving a more solid interface with the cassette body. FEATURES - Chromoly Steel Offers Extra Long Service Life - 5mm Wide Inner Base to Give a More Solid Interface with Freehub Body
$49.00
- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear
$49.99 $50.00 On Sale
Made in the US from 6061-T6 aluminum alloy, Box Two Chainrings are round and true. They fit 104 BCD four-bolt cranks and are available in black anodized with laser-etched graphics from 38 to 45-teeth.
- Melt forged aluminum construction - Coiled spring tension adjust
- Bottom bracket for one-piece crank - Sealed mechanism - 24 TPI - Spindle Type: One piece - Cup Material: Steel - Weight: 310-315g - Cup Type: Press Fit - Cup OD/Bearing OD: 51mm
- Cold-forged chromoly construction - 8 splines for removal - Oversize 3-pawl design - Heavy-duty use freewheel - 13T and 14T fit Flip-Flop hubs only - Speeds: Single - Width: 3/32"
- Chromoly steel BMX style forks - Perfect replacement for modern BMX-inspired wheelie bikes - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Material: Chromoly - Race Diameter: 30mm - Axle: 3/8-inch
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 7.5 – 9.5-inch - Diameter: 1.5mm
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 11 - 12.5" - Diameter: 1.5mm
$21.99
- Compatible with 1-piece BMX cranks - CNC machined 6061-T6 alloy construction - Teeth: 25T - Material: Alloy - Chain Compatibility: 1/2x 1/8-inch - Tooth Type: Standard
$49.99
- Converts a 68mm American style bottom bracket to take a 3-piece 19mm-spindle crank - Bearings included - Shell: 68mm - Interface: American - Spindle Type: 19mm - Cup Material: Alloy
$109.99 - $116.00
- CNC-machined in Canada from custom-extruded 6061-T6 aluminum - 17mm super low-profile concave parallelogram body with 10 replaceable pins per side to increase grip - Nickel plated forged chromoly spindle turns on sealed bearing and proprietary KY bushing internals - 9/16-inch spindle
A durable lock-on grip with a unique finned texture for added comfort and control on the trail. Get a grip on sustainability The XR Trail Elite mountain bike grip has a finned texture that forms to your hand to keep you comfortable on all-day riding sessions. A higher density material surrounds the end of the grip for added durability and the lightweight CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design are optimized for control and comfort - Grip core made with recycled ocean-bound plastic - Single-clamp design maximizes grip surface for secure, predictable performance - Alloy core-lock clamp eliminates slipping by securing grip core to bar - Higher-density end cap resists scraping for added durability - 3mm M4 bolt increases hold and resists stripping - 31mm diameter
A dual lock-on MTB grip with a unique finned texture that provides a secure, comfortable grip for your hands for added support and control. Take command of your cockpit with a secure, confident grip that conforms to your hands for added comfort and control. The XR Trail Pro features a finned texture that provides a secure yet forgiving feel that oozes confidence and keeps you comfy on even the longest days on the bike. A dual Lock-on keeps things in place and the recycled materials that make up the grips' core breathe a second life into ocean-bound plastics. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design are optimized for control and comfort - Grip core made with recycled ocean-bound plastic - Dual-clamp with alloy core-lock design offers secure positioning for solid, predictable performance - Available in both standard 130/130 and 90/130 SRAM TwistLoc-compatible designs - 3mm M4 bolt increases hold and resists stripping - 32mm diameter
$2.99
Bar end plugs (2)
$4.99
- All cables are pre-stretched - Low-friction, slick surface cables for smooth braking action - Can be used for road and mountain bikes - Stainless steel kit is rust-proof
$6.99
Shimano compatible road caliper brake pads from Bontrager. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Sleek brake pads and cartridges are Shimano compatible - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs
$9.99
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.
$11.99 - $12.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip
$11.99
Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands
$14.99
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look
$14.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$14.99
A lock-on grip with a unique finned texture for added comfort and control. Get a grip on sustainability The XR Trail Comp grip features a unique finned texture that conforms to your hand to keep you comfortable all day while you ride. Plus, a lightweight nylon CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design are optimized for control and comfort - Grip core made with recycled ocean-bound plastic - Single-clamp design maximizes grip surface for secure, predictable performance - Nylon CoreLock clamp offers dual clamp strength - 3mm M4 bolt increases hold and resists stripping - 31mm diameter
$15.99
Genuine Bontrager replacement headset spacers. - Precision-machined aluminum construction - Precision cut to ensure proper headset function - Sold in packs of 3
$19.99
This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing
$19.99
Get back on the road with a replacement handlebar for your cruiser bike. Customize your bike with a new handlebar that fits your own personal style. PRODUCT DETAILS - Traditional 35 degree back sweep handlebar - 6061-T6 polished aluminum with anodize finish - RIDE+ versions have an integrated cable guide inside
$21.99
Double Gel Cork tape pairs an extra layer of gel padding with classic, long-lasting cork for handlebars that feel comfortable and look timeless. It's easy to install, looks great, and feels even better. - Ideal stretch for quick and easy installation - Features twice the amount of gel for maximum comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing - Double Gel Cork Tape has a thickness of 3.0mm
$24.99
Lock on to the trail Confidently handle any trail with the XR Elite mountain bike grip. This 30mm single lock-on grip features core lock clamps to hold tight on any terrain, and the perfect combination of rubber compound and tread design adds comfort and confidence on any trail. Key features - Tread and rubber compound provide secure grip, control, and comfort - Tread features continuous channels to funnel sweat for effective moisture management - Single-clamp design maximizes grip surface for secure, predictable performance - Core-lock clamp eliminates slipping by securing grip core to bar - 3mm M4 bolt increases hold and resists stripping - 30mm diameter
$29.99
Instantly add comfort to your existing saddle with a cushy Bontrager Gel Saddle Cover. Rubberized on the underside to help it stay firmly in place, Bontrager's Gel Saddle Cover installs in seconds, thanks to a drawstring and toggle closure retention system.
$29.99
- Grippy texture for consistent no-slip grip - Ideal stretch for quick and easy installation - Shock-absorbing foam for added comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing
$29.99
Fitness-focused Posture 4 saddle with comfort of a cut-out design. Fitness focused, and designed for comfort The women's Sport cycling saddle provides performance, support, and comfort that is tailor made for the female fitness rider. A full cut-out design and soft padded design adds comfort to every ride and helps make staying fit more fun. Product details - Fitness Posture 4 features an upright pelvic rotation to go farther, faster - Engineered specifically to yield better fit and greater comfort for women - Contour Relief Zone Plus (CRZ+) full saddle cut-away enhances soft tissue protection - Tough, weather-resistant cover repels water - Sleek, supportive padding provides comfort while maintaining performance Specifications - Size: 275mm x 167mm - Length: 275mm - Width: 167mm - Rail dimensions: Round 7x7mm (Standard) - Cover material: Microfiber - Rail material: Steel - Weight: 355g
$30.00
Comfortable performance for road or trail Arvada Comp adds comfort and reduces soft tissue pressure by creating a strategic cut-out in the saddle shell. This allows the softer finishing material across the shell cut-out to be more compliant, resulting in added comfort for the rider. With Arvada Comp, you get the benefits of a cut-out saddle with the classic look and feel of a more traditional design. Key features - Performance Posture 3 for pelvic rotation with a balance of comfort and efficiency - Channel Flex on bottom of shell for added compliance - Zone Density shell construction is strategically placed for optimal comfort and performance - Size Specific Curvature ensures each saddle is designed specific to its width - inForm BioDynamic products optimize your natural movement for sustained, higher performance
$34.99
Keep your seatpost right where you left it. - Cable actuated remote lever for the Bontrager Line Dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Designed to ergonomically replace the left shifter on 1x drivetrains
$34.99 - $64.99
Stiff and light with the cleanest accessory solutions available When all you need is the right position, the Elite stem gets it done and more. The strong and light alloy stem is your bike's best workhorse and also features Blendr accessory integration for a sleek setup. Key features - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Safe for use on carbon steerer tubes and handlebars - Includes one Blendr base to integrate Ion lights and Trip computers.
$36.99
Super tacky (in a good way) Confidently ride in all conditions with the no-slip grip of our Perf Line Handlebar Tape. This tape adds an extra layer of comfort with shock-absorbing foam, and keeps your bike looking classy and sleek with perforated details and a thinner profile. Handlebar tape with extra-tacky texture, classic perforation, and a thinner profile that lends a better grip on road rides. - Super-tacky texture offers a no-slip grip - Classic perforated styling adds texture and looks clean - Ideal stretch allows quick and easy installation - Shock-absorbing foam elevates comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing simplifies installation - Thinner profile for a sleek look
$44.99
A fitness saddle that combines a full cut-out with air foam and a dual density shell for comfort and support on every ride. The Commuter Comp saddle offers the comfort of a full cutout saddle with the support of a saddle designed specifically for commuters and fitness riders. A durable, weather-resistant cover material protects the dual density shell and air foam construction of the saddle for long-lasting comfort wherever you ride. Plus, a simple integrated Blendr mount makes it easy to add a Bontrager Flare rear light. - Fitness Posture 4 features an upright pelvic rotation to go farther, faster - Contour Relief Zone Plus (CRZ+) full saddle cutaway enhances soft tissue protection - Dual-density shell and air foam construction is soft yet supportive - Tough, weather-resistant cover repels water - Blendr attachment allows for integrated rear light mounting
$49.99
Key features: - Designed for use on carbon rims - Confirm wheel compatibility before use - Use in mud and grit will accelerate rim wear - 520554 is the Shimano style Flash Evo and fits Shimano and SRAM - 520555 is the Campagnolo style Race Pro
$49.99
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride. Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
$59.99
Genuine replacement parts When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Details: - Replacement cartridge units for Bontrager Line Dropper seat posts - Be sure to use the correct size cartridge for the respective amount of travel - Regular maintenance will help maintain performance and extend the lifespan
$64.99
The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer, and more with Blendr Elite accessory integration. - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Includes one Blendr base to integrate Ion lights and Trip computers
$64.99
Bontrager's Elite Stem is all about solid performance and seamless integration. Thanks to its one-piece, cold-forged 6061-T6 aluminum construction, it's strong, light and stiff. The 4-bolt faceplate is ultra tough and evenly distributes clamping forces, so it's safe, secure and compatible with both carbon steerers and bars. The real beauty of this stem is the Blendr integration. It works with Bontrager's Trip computers, Ion lights and their iPhone 5 case without the need for extra mounts on your bars. • Seamless accessory integration with Blendr Elite • 4-bolt dual band clamp retains stiffness and reduces weight • Opposing 2-bolt steerer tube clamp • Uses M5 countersunk corrosion-resistant steel bolts with 5.2Nm torque spec • Safe for use on carbon steerer tubes and handlebars • Constructed of 6061-T6 3D forged alloy • Includes one Blendr base with Ion Light and Trip computer mount • Not compatible with Blendr Pro / XXX mounts
$69.99
A comfort saddle with a patented fluid technology that moves freely with you as you pedal for less pressure and more comfort. Bontrager's Boulevard Fluid saddle puts your comfort first with patented fluid technology that moves with you to reduce pressure while you're pedaling. The full cutout design and air foam deliver a difference you can feel on casual cruises through your town and neighborhood. Plus, it has an integrated mount for a tail light! Product details - Fluid adds comfort by moving with you as you pedal to alleviate pressure - Fluid is better than gel at reducing pressures, showing an average reduction of over 20% in peak pressure compared to gel alone - Full cutout provides targeted support and soft-tissue relief - Dual-density shell and air foam construction is soft yet supportive - Blendr attachment allows for integrated rear light mounting - inForm saddles utilize the latest in biomechanical research to maximize performance and rider comfort - The Unconditional Bontrager Guarantee offers 30 days to love it, or we'll take it back
$69.99
A fitness saddle with a patented fluid technology that moves freely with you as you pedal for less pressure and more comfort. Bontrager's Commuter Fluid Saddle moves with you to reduce pressure on fitness rides and commutes. The patented fluid technology performs better than standard gel—and it's paired with air foam and a full cutout for soft tissue protection and support. Plus, you can easily attach a Flare tail light to the rear-facing Blendr mount! Product details - Fluid adds comfort by moving with you as you pedal to alleviate pressure - Fluid is better than gel at reducing pressures, showing an average reduction of over 20% in peak pressure compared to gel alone - Full cutout provides targeted support and soft-tissue relief - Dual-density shell and air foam construction is soft yet supportive - Blendr attachment allows for integrated rear light mounting - inForm saddles utilize the latest in biomechanical research to maximize performance and rider comfort - The Unconditional Bontrager Guarantee offers 30 days to love it, or we'll take it back
$89.99
The Ajna Comp is the cutout saddle that every female rider can appreciate. Built to be at home on either your road or mountain bike in an aggressive Posture 2 position, the Ajna's shape offers increased stability at the nose and better pressure distribution throughout. Designed for a more aggressive riding position during sustained efforts, the Ajna Comp women's saddle delivers a great fit to preserve comfort and performance. Key features: - An aggressive posture 2 saddle that excels both on the road and mountain bike - Engineered specifically to yield better fit and greater comfort for women - Contour Relief Zone Plus (CRZ+) full saddle cutaway enhances soft tissue protection - Wider cutout and shaped nose yield stable comfort in an aggressive position - Soft cushion padding provides ultra comfort - inForm BioDynamic products optimize your natural movement for sustained, higher performance
$99.99
Grippy, durable flat pedal for trail and park use. Find it. Rip it. Choose your line Flat pedals are the preferred choice of downhillers, dirt jumpers, and enduro riders, but any trail rider can reap the benefits of a pedal born from the demands of those elite riders. A curved body and solid platform with traction pins mean that every time you place your foot, your shoe stays put. Lift off at any moment knowing you can stamp back down on the gas and find firm placement. Product details - Dial in your preferred traction with tuneable pin placement and contact height - Durable axle spins on sealed cartridge bearings - Pedal body is made from 6061-T6 aluminum - Threading: 9/26” (15mm)
$99.99
Our most versatile performance saddle offers a full cutout for targeted support and soft tissue pressure relief for riders of all genders and all disciplines. For mountain, for road, for men, for women Our most versatile performance saddle puts you in a power posture for speed and control wherever you ride—and it’s available in an wide range of sizes to ensure you get the fit you need. A full cutout ensures long-haul comfort for all riders and all terrain. Plus, it has longer saddle rails to tailor your fit and an integrated Blendr mount for a Flare tail light. Product details - Saddle design supports riders of all genders in a performance riding position on road and mountain bikes - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Lightweight shell provides balance of weight, strength, and compliance - Comp-level trim optimizes foam padding for added lightweight comfort - Multiple widths and extended rail clamping area give more fit options - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Available Blendr accessory mounts to cleanly integrate rear light
$104.99
A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain. The bar with a flare for adventure The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions. Product details - 13-degree flare allows for more control in the drops - Custom-butted, lightweight 6061-T6 alloy construction - Shorter reach and wider flare allows for confident handling and easy access to controls - Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Laser-etched brake lever position lines for spot-on control setup - Compatible with clip-on aero bars
$109.99
Strong, light, and capable The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system. An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight - Oversized 35mm clamp diameter offers increased strength and minimal weight - 7075 T73, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Blendr compatible for an elegant, integrated accessory mounting solution - Available in a wide range of sizes for today's mountain rider - High-strength, corrosion-resistant steel bolts - Approved for carbon bars
$114.99
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
Page 1 of 7 Next page